Tap Chucks and Rubber Flex Collets

Industrial Toolholders - Tap Chucks

Tap Chucks

Jacobs® Tap Chucks are designed for use on tapping machines, portable tappers and air tappers, and are available with a range of mounts.

Features

Designed for use with the versatile Rubber-Flex Collet to handle a wide range of tap sizes.

Simple operation - one quarter turn of chuck screw allows nut to disengage back jaws.

Positive-drive chuck jaws always locate square on tap shank to ensure superior performance.

Rubber-Flex®Collet centralises tap to give extreme accuracy.

Model No. Part No. Mount Style Tap Capacity Range mm Overall Length Max. Cap Maximum Dia. mm Round Shank Capacity mm Available Collets
41-01 14121 1JT 1 - 6 51 221 2 - 6 J112, J113, J114, J116, J117
42-01 14123 1JT 5 - 13 64 27 2 - 10 J420, J421, J422, J423
42-02 14125 2JS 5 - 13 64 27 2 - 10 J420, J421, J422, J423
42-24 14129 .3675 5 - 13 64 27 2 - 10 J420, J421, J422, J423
42-J8 14127 .375 sq 5 - 13 59 27 2 - 10 J420, J421, J422, J423
44-02 14131 2JT 3 - 16 79 37 2 - 13 J440, J441, J443
44-06 14133 6JT 3 - 16 79 37 2 - 13 J440, J441, J443
44-J9 14135 .50 sq 3 - 16 79 37 2 - 13 J440, J441, J443

*Collets are not included and must be ordered separately

 

Rubber-Flex® Tap Chuck Collets

Jacobs® Tap Chucks are designed for use on tapping machines, portable tappers and air tappers, and are available with a range of mounts.

Model No. Part No. Capacity Range (A) mm Contact Length (B) mm Cone Angle (C) Deg Outside Diameter (D) mm Number of Inserts
J115 7203 1.0 - 2.5 12 13 15 4
J116 7204 2.5 - 4.5 12 13 15 6
J117 7205 4.5 - 6.5 12 13 15 8
J420 9747 4.5 - 8.1 12.7 40 23.9 6
J421 9748 3.5 - 6.5 12.7 40 23.9 6
J422 9751 6.4 - 9.7 12.7 40 23.9 6
J423 9817 2.3 - 4.6 12.7 40 21.8 4
J440 9749 7.1 - 12.7 16 45 32.9 6
J441 9750 4.5 - 9.7 16 45 32.9 6
J443 9867 2.8 - 7.1 15.7 45 30 4
J445 9869 10 - 15 16 22-30 32.5 8
J461 9800 10 - 16 19 25 44.5 9
J462 6693 16 - 23 19 25 44.5 9

> Back to Jacobs Chucks